Depreciation Class 11: SLM and WDV Worked Examples
Solve Class 11 depreciation numericals with SLM, WDV and part-year additions. Check asset cost, changing book values and common calculation mistakes.

| Topic | Exam Prep |
|---|---|
| Read time | 5 min |
| Words | 874 |
| Published | 16 Nov 2026 |
| Best for | Parents & students |
In Class 11 depreciation numericals, straight line method (SLM) keeps the annual charge constant for an unchanged asset used for a full year. Written down value (WDV) applies the rate to the opening book value, so the charge falls each year. Before calculating either one, settle the asset's cost, the method and the months covered.
The examples below use original practice figures, not copied textbook questions. They follow the calculation principles in NCERT's Depreciation, Provisions and Reserves chapter. They are school-accounting exercises, not guidance for calculating an income-tax deduction.
Start with the right cost
A machine's cost is not always its invoice price. Add expenses necessary to bring it into working condition, such as freight and installation. Do not casually add an ordinary repair incurred after the machine is already in use.
Suppose a machine costs Rs 96,000 and installation costs Rs 4,000. Its recorded cost is Rs 1,00,000. If its estimated residual value is Rs 10,000, the amount to allocate over its useful life under SLM is Rs 90,000. Residual value means the estimated net amount recoverable at the end, not this year's depreciation.
Example 1: SLM from cost, residual value and life
Use the Rs 1,00,000 machine above. Assume it is ready for use on 1 April, its useful life is five years and the accounts close on 31 March. Calculate a full year's charge.
- Depreciable amount = Rs 1,00,000 minus Rs 10,000 = Rs 90,000.
- Annual depreciation = Rs 90,000 divided by 5 = Rs 18,000.
- Book value after year one = Rs 1,00,000 minus Rs 18,000 = Rs 82,000.
- Book value after year two = Rs 82,000 minus Rs 18,000 = Rs 64,000.
The annual charge remains Rs 18,000 for each full year, assuming the estimates do not change. After five years, total depreciation is Rs 90,000 and the book value is Rs 10,000. Do not depreciate the residual value as though it were another year's expense.
If asked for the rate on original cost, calculate Rs 18,000 divided by Rs 1,00,000, multiplied by 100: 18%. Dividing by Rs 90,000 instead answers a different question.
Example 2: WDV needs a fresh base each year
Now take a separate asset costing Rs 1,00,000, bought and ready for use on 1 April. The question specifies WDV at 20% per annum. Do not carry the previous example's five-year life or residual value into this question.
- Year one: Rs 1,00,000 x 20% = Rs 20,000 depreciation; closing book value Rs 80,000.
- Year two: Rs 80,000 x 20% = Rs 16,000 depreciation; closing book value Rs 64,000.
- Year three: Rs 64,000 x 20% = Rs 12,800 depreciation; closing book value Rs 51,200.
Total depreciation is Rs 48,800. Check it against cost minus closing value: Rs 1,00,000 minus Rs 51,200 gives the same answer. The rate stayed at 20%; the base changed. Charging Rs 20,000 again in year two would silently turn this into an original-cost calculation.
Example 3: an addition halfway through the year
At 1 April, an existing machine has an opening WDV of Rs 80,000. Another machine costs Rs 40,000 and is ready for use on 1 October. The business closes accounts on 31 March and charges 10% WDV per annum, proportionately for time used.
Keep the two machines separate in a working note. The old machine's charge is Rs 80,000 x 10% = Rs 8,000. The new machine's charge is Rs 40,000 x 10% x 6/12 = Rs 2,000. October through March gives six months in this exercise.
Total depreciation is Rs 10,000. Closing combined book value is Rs 80,000 plus Rs 40,000 minus Rs 10,000 = Rs 1,10,000. Next year's opening bases are Rs 72,000 and Rs 38,000 respectively, if neither machine is sold or otherwise adjusted. If a question expressly gives a different part-year policy, follow that policy instead.
Check the working before writing the ledger
Write the method beside the rate. Then label each asset's opening value and months. A combined balance without separate workings makes it easy to charge a late addition for twelve months.
For a direct write-off entry, debit Depreciation Account and credit the Asset Account. Where the question uses a provision or accumulated depreciation account, credit that account instead. Do not mix the two recording methods. If debit and credit logic needs revision, use our guide to finding accounts tuition to identify the specific gap to practise.
Try one without looking back: equipment opens at Rs 75,000 and attracts 15% WDV for a full year. Depreciation is Rs 11,250 and closing value is Rs 63,750. An answer of Rs 60,000 usually means the rate was read as 20%.
Frequently asked questions
What is the SLM depreciation formula?
Subtract estimated residual value from cost, then divide by estimated useful life. Adjust the annual charge for a part-year when required.
What is the WDV depreciation formula?
Multiply opening book value by the stated annual rate. For a part-year, apply the required fraction of the year.
Is installation included in the asset's cost?
Yes, installation needed to bring the asset into working condition forms part of its cost.
Should I subtract residual value every year under WDV?
No. In these rate-given exercises, apply the specified rate to opening book value; do not deduct residual value each year.
Related articles
- Price Elasticity of Demand: Class 11 Worked Examples
- Rectification of Errors: Suspense Account Examples
- Bank Reconciliation: Cash Book and Overdraft Examples
- Opportunity Cost from a PPC Table: Class 11 Numericals
- Molar Mass from Colligative Properties: Worked Examples
Explore related tuition services: accounts home tutor · online tuition